20
•
EN
Using the audio player
The audio player allows streaming music from your mobile devices such as smartphones, tablets and
notebooks and accepts USB storage devices with MP3, WMA and WAV files.
1) To use the audio player, set the input selector for channel 1 to the left position.
2) For Bluetooth operation press the PAIRING button to enter pairing mode. The display indicates
“ConnectingU”.
3) Activate the Bluetooth function at the Bluetooth source and start the device scan. Select “
OMNITRONIC
PM-322P
“ from the list and connect the devices.
4) Now play music at the Bluetooth source as you normally would and use the control elements of channel
1 to mix the audio player’s signal to the master signal.
5) For USB operation insert a USB drive into the USB port. After loading a device, it is selected as the
playback medium and read in. The display shows various information. If a data carrier is not recognized
at the first try, remove it and insert it again. Now use the PLAY/ STOP and
/
buttons for playback
control.
7
Cleaning and Maintenance
Disconnect from mains before starting maintenance operation! We recommend a frequent cleaning of the
device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts. If the power supply cable of this device
becomes damaged, it has to be replaced by a special power supply cable available at your dealer. Should
you have further questions, please contact your dealer.
