10355640_V_1_0.DOC
23/36
2-way stereo operation with mono-subwoofer
Most common setting in discotheque appliances. Phase erasions in the bass-range can be avoided and the
system gains around 3 dB in the bass-range.
Activate the stereo mode via the MODE switch on the rear panel.
Example for setting the frequency ranges (depending on the system and the room):
Bass
Highs
40 Hz - 250 Hz
250 Hz - 20 kHz
The frequency can be adjusted via the LOW/HIGH XOVER Frequency Control, depending on the XOVER
Frequency Switch between 45 Hz and 900 Hz or between 450 Hz or 9 kHz (LED lit).
With the Input Level Control, you can adjust the incoming signal level from -
∞
to +6 dB.
With the Low Level and High Level Controls, you can attenuate the respective output level from -
∞
to +12
dB. In the stero mode, both channels should be adjusted the same way.
Содержание LXO-23
Страница 2: ......