www.omnitronic.com
00052359.DOC, Version 1.0
Dynamic Instrument Microphone
Safety Instructions
Setting into Operation
Cleaning
Technical Specifications
The OMNITRONIC
is a dynamic microphone with cardioid characteristic designed for
studio and live applications and is ideally suited for
.
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Type:............................Dynamic
Directivity pattern: ........Cardioid
Frequency range:.........80 Hz - 13 kHz
Impedance:..................250
Sensitivity: ...................-54 dB
Weight: ........................200 g
IM-550
W
direct pick-up of low-frequency musical
instruments like drums, percussions, wind instruments, and guitar amplifiers
Screw the holder onto a stand with 1.5 cm thread. For stands with 1 cm thread use the supplied
adapter screw. Connect the microphone via a balanced microphone cable with 3-pin XLR plug to the
XLR microphone input of your audio unit (e.g. mixing console).
Please note: Every information is subject to change without prior notice. 10.07.2009 ©
INSTRUMENT MICROPHONE
USER MANUAL
IM-550