Omnitronic DYN-220, Руководство пользователя

Страница: 14 / 20

14
•
EN
3
3 3
3 Operating
Determinations
The DYN-220 is a dual-channel compressor with
gate designed for professional PA applications.
The unit allows to process the dynamics of an
audio signal with ease.
Power Supply
• This product is allowed to be operated with an
alternating current of 230 V, 50 Hz and was
designed for indoor use only. The occupation of
the connection cables is as follows:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
• The earth has to be connected! If the device will
be directly connected with the local power
supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to
be included in the permanent electrical
installation. The device must only be connected
with an electric installation carried out in
compliance with the IEC standards. The electric
installation must be equipped with a Residual
Current Device (RCD) with a maximum fault
current of 30 mA.
Installation
• Do not shake the device. Avoid brute force
when installing or operating the device. When
choosing the installation spot, please make sure
that the device is not exposed to extreme heat,
moisture or dust. There should not be any
cables lying around. You endanger your own
and the safety of others!
Taking into Operation
•
Operate the device only after having familiarized
with its functions. Do not permit operation by
persons not qualified for operating the device.
Most damages are the result of unprofessional
operation!
Ambient Conditions
• The ambient temperature must always be
between -5° C and +45° C. Keep away from
direct insulation (particularly in cars) and
heaters. The relative humidity must not exceed
50 % with an ambient temperature of 45° C.
• This device must only be operated in an altitude
between -20 and 2000 m over NN.
• Never use the device during thunderstorms.
Over voltage could destroy the device. Always
disconnect the device during thunderstorms.
•
This device must never be operated or
stockpiled in surroundings where splash water,
rain, moisture or fog may harm the device.
Moisture or very high humidity can reduce the
insulation and lead to mortal electrical shocks.
• When using smoke machines, make sure that
the device is never exposed to the direct smoke
jet and is installed in a distance of 0.5 meters
between smoke machine and device.
Transport
• Please use the original packaging if the device
is to be transported.
Cleaning and Service
• Disconnect from mains before cleaning! Never
use solvents or aggressive detergents in order
to clean the device! Rather use a soft and damp
cloth.
• There are no serviceable parts inside the device
except for the fuse. Maintenance and service
operations are only to be carried out by
authorized dealers! Should you need any spare
parts, please use genuine parts.
Modifications and Guarantee
• Please consider that unauthorized modifications
on the speaker system are forbidden due to
safety reasons!
• If this device will be operated in any way
different to the one described in this manual, the
product may suffer damages and the guarantee
becomes void. Furthermore, any other operation
may lead to dangers like short-circuit, burns,
electric shock, etc.
WEEE Directive
If the units are to be put out of operation
definitively, take them to a local recycling
plant for a disposal which is not harmful to
the environment. Do not dispose of as
municipal waste. Contact your retailer or
local authorities for more information.