Omnitronic DXO-26E, Руководство пользователя

Страница: 28 / 31

00053694.DOC, Version 1.1 28/31
D. Indicating versions and serial number
The current hardware and software version as well as the serial number of the unit can be indicated on the
display.
1
Call menu item Version Info. The display indicates the hardware version (HW).
2
Turn the rotary press control DATA to indicate the software version (SW).
3
Turn the control again to indicate the serial number (SN).
E. Changing the menu language
After switching on English is selected as menu language. In this menu item you can switch to German,
Spanish, French and Dutch.
1
Call menu item Language.
2
Turn the rotary press control DATA to select a language.
3
Press the control to confirm your selection.
6.2 Adjustments in the parameter menu
Use the buttons CH UP and CH DOWN to select the input channel or output 1 to 6 to be adjusted. You can
select the desired menu item with the buttons NEXT and PREV. The respective parameters can be adjusted
by turning or pressing the rotary press control DATA. Press the button ESC to abort the setting procedure
and exit the parameter menu. 60 seconds after the last actuation of a button the setting procedure will also
be cancelled automatically.
Modifications of parameters affect the components connected immediately. To keep the adjustments
permanently, they must be saved in the EEPROM of the crossover (
section A. Loading and saving user
presets).
6.2.1 Configuration of input channels A and B
Select the desired input channel and adjust the input gain between -50 dB and +12 dB by turning the rotary
press control DATA. If the clip indicator lights up, the input is overloaded. In this case, reduce the gain
correspondingly.
As a basic setting the input channels A and B will be linked when selecting a stereo operating mode. Thus
the input gain can be collectively adjusted for both channels. This setting can be changed (
section H).
6.2.2 Configuration of outputs 1 to 6
As a basic setting the outputs 1 and 2, 3 and 4, and 5 and 6 will be linked when selecting a stereo operating
mode, i.e. the following parameter modifications are collectively adjusted for every two outputs. This setting
can be changed (
section H).