00029930.DOC, Version 1.0
25/25
Procedure:
Step 1:
Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
90-240 V AC, 50/60 Hz ~
Power consumption:
30 W
Inputs:
8/16, active, balanced
Gain range:
-40 dB to +6 dB
Input impedance:
10 kOhms
Frequency Response:
20 Hz - 20 kHz
Outputs:
8/16, active, balanced
Output impedance:
<50 mOhms (electronically balanced)
Output gain range:
-40 dB to +6 dB
Maximum output level:
+20 dBu
THD:
0.01 %
Delay:
0~1365 ms
Filters:
HPF:
10 Hz - 16 kHz
LPF:
35 Hz - 20.2 kHz
Slopes:
6, 12, 18, 24 or 48 dB/octave
Type:
Bessel, Butterworth or Linkwitz-Riley
Equalizers:
PEQ:
20 Hz - 20 kHz
LOSHF:
20 Hz - 1 kHz
HISHF:
1 kHz - 20 kHz
Q-value:
0.4-128
Gain:
±12 dB; 0.1 dB
Compressor:
Threshold:
-24 to +12 dB; 1 dB
Ratio:
1:128 to 128:128
Boost:
x1, x2, x4, x8
Limiter:
Threshold:
-53 to +10 dB; 0.5 dB
Attack:
20
R
s to 3 ms/dB
Release:
10 ms/dB to 5 sec/dB
Noise Gate:
Threshold:
-66 to -24 dB; 1 dB
Attack:
0.1 ms to 100 ms/dB
Release:
10 ms/dB to 5 sec/dB
Dimensions (WxHxD):
482 x 88 x 230 mm
Weight:
7.2 kg
Please note: Every information is subject to change without prior notice. 06.09.2007 ©
Содержание DXM-0808
Страница 2: ......
