00030074.DOC, Version 1_0
32/32
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
11. TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption (max.):
2100 W
Power output sine:
8 Ohm:
4 x 400 W
4 Ohm:
4 x 600 W
8 Ohms bridged:
4 x 1200 W
Frequency range:
20 - 20 000 Hz
Damping-factor:
>150
Distortion factor:
0.05 %
Signal to Noise Ratio:
95 dB
Min. input sensitivity:
0.775 V
Input impedance:
20 kOhms (balanced), 10 kOhms (unbalanced)
Input:
4 balanced XLR-connectors
Output:
4 balanced XLR-connectors, 4 x screw connectors
Control elements:
Power switch, Input attenuators (per channel), Low pass (two channels),
High pass (2 channels), Operating mode
Low pass:
50 - 250 Hz
High pass:
50 - 250 Hz
Protection:
Overheat, overload, short-circuit, DC, softstart, VHF signals
Indicators:
Power, Bridge, Protect, Clip, Signal
Construction:
Steel chassis
Dimensions:
482 x 490 x 90 mm
19"-dimensions with 2 u
Minimum mounting depth:
510 mm
Weight:
28 kg
Please note: Every information is subject to change without prior notice. 12.09.2007 ©
Содержание 10452460
Страница 2: ......
