OM5200 Technical Manual
Rev.
1.0
Document No.: 19B00293
Date: March 6, 2018 Page: 17
35 ESC c 3
Select paper sensor(s) to output paper-end signals
36 ESC c 4
Select paper sensor(s) to stop printing
37 ESC c 5
Enable/disable panel buttons
38 ESC d
Print and feed paper
n
lines
39 ESC p
General pulse
40 ESC t
Select character code table
41 ESC {
Set/cancel upside-down character printing
42 GS !
Select character size
43 GS $
Set absolute vertical print position in page mode
44 GS *
Define downloaded bit image
45 GS /
Print down-loaded bit image
46 GS :
Start/end macro definition
47 GS B
Turn white/black reverse printing mode on/off
48 GS H
Select printing position of HRI characters
49 GS I
Transmit printer ID
50 GS L
Set left margin
51 GS P
Set horizontal and vertical motion units
52 GS V
Cut paper
53 GS W
Set printing area width
54 GS \
Set relative vertical print position in page mode
55 GS ^
Execute macro
56 GS a
Enable/disable Automatic Status Back(ASB)
57 GS b
Turn smoothing mode on/off
58 GS f
Select font for HRI characters
59 GS h
Set bar code height
60 GS k
Print bar code
61 GS r
Transmit status
62 GS v 0
Print raster bit image
63 GS w
Set bar code width
