OmniPreSense OPS241, Обновление программного обеспечения

Страница: 3 / 8

AN-013-A OPS241 Code Update OmniPreSense Corporation 3
Figure 4. USB and JTAG Connections to PC
Step 4. Start Memtool on the PC to get a window similar to that shown in Figure 2. Press the Connect
button. A message will appear to the right of the Connect button indicating the connection is in progress.
If successful, the
message will change to “Ready for Memtool Command” (Figure 5).
Figure 5. Memtool Connected State Window
Next, select Open File in the middle left of the window, browse to the location of the hex file to update
the OPS241 with (Figure 6) and press Open. Contact OmniPreSense
customer service to obtain the latest
code version.