POWER TROLLEY 8 INSTRUCTION MANUAL
9
PRECAUTIONARY ADVICE
The manufacturer has taken all possible precautions to protect this unit
against overload, over temperature, reverse polarity, etc. If excessive
overload, excessive temperature and/or reverse polarity are applied to the
unit, the protection circuit will work but with excessive mishandling they may
give in after a while and this can cause damage to the unit. It is therefore up to
the user to connect the correct loads and to use the unit within the specified
parameters. The user must also ensure that no reverse power is fed back into
the output sockets of the system.
The unit must not be kept or operated in direct sunlight and should never be
placed in a moist or wet environment.
9. OVERLOAD RESET
You’ll see a ‘resettable’ circuit breaker on the side of the Power Trolley 8. This
is an additional safety device which will trip if you substantially overload the
unit. Disconnect the equipment you’ve connected to the AC connection
sockets, reset the breaker and try connecting with less equipment connected
to the unit.
