OmniPower Power Caddy III, Инструкция по эксплуатации

Страница: 6 / 16

6
3. CONNECTIONS TO THE POWER CADDY III
Supplied with the Power Caddy III is a 3-pin 15A SA cable with a 3-
pin ‘G-ST18i
connector
’. This cable is for the built-in battery charger in the Power Caddy III. Connect
this cable to an AC mains wall socket to charge the unit. You should leave the unit
permanently connected. If you wish to disconnect the Power Caddy III, ensure the
battery is “fully charged”.
Never leave the unit standing with a discharged battery;
you will damage the battery and void the warranty.
If you’ve decided to take the unit away for the weekend, place the unit where you need
it, plug in your equipment, turn it ON and you’ve got instant AC power.
AC Input AC Output Master Switch