OmniPod PODDER, Руководство по ресурсам

Страница: 12 / 42

10
HOW TO CHANGE THE POD
You may need to change the Pod:
+ When the reservoir is low or empty, or the Pod is nearing expiration
+ In response to an alarm
+ If the Pod/cannula has become dislodged
+ If you have a blood glucose reading of 250 mg/dL or more and ketones are present
+ If you experience unexpected elevated blood glucose levels
+ As directed by your healthcare provider
+ If a Pod is active and fails to beep
1. Turn on the PDM. Press the Home/
Power button, then select More
actions.
2. Select Change Pod.
3. Press Confirm to deactivate the Pod.
Gently remove the deactivated Pod by
slowly peeling back the adhesive. (Our
users have reported commercial solvent
or baby oil can be helpful to soften the
adhesive if necessary.)
4. Press Yes to activate a new Pod. Follow
the steps on pages 11 and 12 in this
guide to fill a new Pod with insulin. As
you proceed, if the PDM screen times
out, press and hold the Home/Power
button to turn it back on.
If the PDM screen times out during the process, press and hold the Home/Power button to continue.
3:00p 5/15
Bolus
More actions
Temp basal
My records
Settings
Suspend
Status Select
3:00p 5/15
Change pod
Add BG reading
Assign/Edit BG tags
View food library
Back Select
3:00p 5/15
Press “Confirm” to
begin the pod change
process.
This will deactivate your
current pod.
Back Confirm
3:00p 5/15
Last BG 150 mg/dL
2:51p today
Last bolus 5.00 u
3:00p today
IOB 5.00 u
No Yes
No active pod.
Would you like to
activate a pod now?
3:00p 5/15
Pod deactivated.
Remove and discard
the pod, and then press
“Next.”
Next Confirm
OMNIPOD
®
INSTRUCTIONS | How to change the Pod