Omnimount CI40FML Скачать руководство пользователя страница 2

2 of 9

888-61-246-G-00 rev. B • 07/16

Disclaimer – OmniMount Systems, Inc. has extended every eff ort to ensure to accuracy and completeness of this manual. However, OmniMount Systems, Inc. does not claim that the 
information covers all installation or operational variables. The information contained in this document is subject to change without notice or obligation of any kind. Regarding the 
information contained herein, OmniMount Systems, Inc. makes no representation of warranty, expressed or implied, and assumes no responsibility for accuracy, suffi

  ciency, or com-

pleteness of the information contained in this document.

WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS PERSONAL INJURY, DAMAGE TO PERSONAL PROPERTY, OR VOID-
ING OF FACTORY WARRANTY!
It is the responsibility of the installer to ensure all components are properly assembled and installed using the instructions provided. If you do not understand these instructions or 
have any questions or concerns, please contact customer service at 1-800-668-6848 or [email protected].

Do not attempt to install or assemble this product if the product or hardware is damaged or missing. In the event that replacement parts or hardware are needed, please contact 
Customer Service at 1-800-668-6848 or [email protected]. International customers needing assistance should contact the Dealer from which they purchased the product.

CAUTION! This mount is not intended for use on brick, concrete or concrete block. It is up to the installer to verify the safety of the installation method or hardware that is not provided 
by OmniMount. The size and weight of your television must be properly supported. The surface must be capable of supporting fi ve times the weight of the television plus the mount. 
The structure of your RV may require additional reinforcement. OmniMount is responsible for the design and manufacturing of our parts; we are not responsible for the structure it is 
mounted to. Improper installation may cause property damage or personal injury. OmniMount cannot be liable for property damage or injury caused incorrect mounting or incorrect 
use during travel or otherwise.

CAUTION! TV must be stowed and mount locks fully engaged before and during any movement or travel. 

CAUTION! This mount is intended for use with weights not exceeding "maximum weight capacity 44lbs." The wall itself has to be capable of supporting 5X standard 
weight. Don't over tighten screws in order to avoid injury. Use with products heavier than the maximum weights indicated may result in collapse of the mount and 
its accessories causing possible injury.

  ENGLISH  DISCLAIMER - WARNING INFORMATION

Содержание CI40FML










Отзывы: