Omnimount 17FBHDT Скачать руководство пользователя страница 1

Страница: 1 / 4

U1T P/N 1002832—Rev. B 07/2005

Installation Instructions

Small Universal Premium Tilt
Flat Panel Mount

Universal Mount—No Adaptor Plate Needed

Ideal for Flat Panels from 12” to 24”

Low Profile Design

Lift n’ Lock Installation

Adjustable Tilt

IMPORTANT: Consult a qualified installer if you have any questions

regarding the proper installation of this wall mount system.

Содержание 17FBHDT

Страница 1: ...ilt Flat Panel Mount Universal Mount No Adaptor Plate Needed Ideal for Flat Panels from 12 to 24 Low Profile Design Lift n Lock Installation Adjustable Tilt IMPORTANT Consult a qualified installer if...

Страница 2: ...he Display Engage the lock by sliding the locking tab up into place Fig 9 Make sure that the locking screw is centered in the lock hole and then tighten securely with the sup plied Hex Wrench Fig 10 T...

Страница 3: ...is play may be damaged 3 Step 2 Mount the Wall Plate Using an electronic stud finder locate the center of the wooden stud at the desired mounting location Mark the stud center position directly onto t...

Страница 4: ...y remove the guide from the wall and discard Note Be sure to hold the guide in an upright position so as not to spill the collected dust Mount the wall plate to the wall with the supplied 12 Phillips...