/
Car & Home Security System
10
11
Car & Home Security System
/
Quick Setup Guide
Quick Setup Guide
STEP2 HDD Installation
1. Unscrew 4 fixed screws on
the bottom of case.
2. Disassemble rear panel and
take out main board.
3. Fix HDD to SATA connector on
main board.
4. Insert rubber rings into screws
and then screw them to fix HDD
& main baord to case.
5. Insert main board with fixed HDD
together into DVR case, making
HDD side up.
6. Assemble rear panel and fix it
with screws.
STEP3 Camera, Monitor and Power Connection
1. Connect camera with specially designed one jack cable (which can
be purchased from supplier) to DVR and connect monitor to DVR
with AV out cable in package.
You can connect normal camera to DVR as well, using optional
camera cable.
2. Connect adapor in package.
- It has to be required to turn power on afterconnecting camera and monitor.
- Use connection cables in package.
- It may cause DVR to work abnormally when not using connection
cables in package.
