Omni8/16C/Omni8P User Manual
UMC1480R24.pdf
28
© Omniflex 2021
3.12
Inserting Legends and Colour Filters into Back-lit Display Windows
3.12.1
Colour of Windows
If Back-lit LED lamps are used, then the colour of the window is set by the choice of LED lamps, and no
additional colour filters are required.
If incandescent lamps are used, then these always give a white light and if a coloured window is
required, a colour filter needs to be inserted into the window.
These coloured filters are provided in a kit of assorted colours supplied with the product.
Each kit of coloured filters contains the following:
C1163 Colour Filter Kit Contents
16 Red Filters
16 Yellow Filters
16 Green Filters
4 Blue Filters
Additional Colour Filter Kits may be ordered as desired by quoting Model Number C1163.
3.12.2
Assembling Backlit Display Windows
Assemble backlit windows into the Omni8/16C as follows:
1.
Assemble each window as shown in Figure 3-10 – Backlit Window Order of Assembly.
2.
Snap the assembled window into position in Omni8/16C.
Figure 3-10 – Backlit Window Order of Assembly
Legend Film
Colour Filter
(if required)
White Diffusor
Rough surface
this side
