6
Version 1.0
5.
Allow the device to charge 6-8 hours before
first use. Reinsert the battery into the outlet
once charging is completely.
OPERATING THE CAMERA
HOW TO TURN ON THE CAMERA
1.
Point the remote at the device and press the
power button on the remote. The Green light
will blink once, then the Red light will blink 3
more times and turn off (if motion is detected
immediately). The device is now in motion
detection mode.
NOTE: If the light doesn’t come on, try many different
angles when pressing the power button and pointing it
at the front/top of the unit. Do not hold down the power
button. Press and release the button only.
2.
To put the device into standby mode, stop
motion recording by pressing the motion
detection button one time (see page 4). The
