Omnia Omnia.9, Инструкция по установке и эксплуатации, Страница: 98 / 264

CHAPTER 12 |
81
FM MENU EXPERT MODE
Ratio Override
♦
The
Gain Reduction Ratio Override
and
Gain Reduction Ratio
controls work together to let you set a different ratio for
each band when audio in that band crosses above threshold – that is, when it is driven into gain reduction. The ratio for
audio below threshold is always determined by the Ratio control for all bands. Specifically, the Gain Reduction Ratio
Override control enables or disables the Gain Reduction Ratio controls, which are sliders that let you set the ratio of
audio above threshold from 1:1 to Inf:1.
Multiband Compression
MBC Main
♦
The
Maximum Gain
control works in conjunction with the Ratio control to determine how much gain is available below
threshold. If the Input AGC Ratio is set at Infinity:1 and the Input AGC Maximum Gain is set to 36dB, the Input AGC has
36dB of range below threshold. At a ratio of 2.0:1 and the same Maximum gain setting, the range is reduced by half to
18dB. The scale to the left of the Input AGC meter automatically adjusts as needed when changes are made to the Input
AGC Maximum Gain or the Input AGC Ratio to accurately reflect how much range is available below threshold.
♦
The
Ratio
control determines how much the output audio will be increased or decreased in relationship to the input
audio of the Input AGC section. For example, a ratio of 3:1 means for every 3dB of change in the level of the input audio,
the output will be changed by 1dB. Lower (looser) settings provide less control of the dynamics in this section but
provide a more open sound, while higher (tighter) settings provide more control at the expense of openness. The range
of this control is 1.0:1 to Infinity:1.