C3IWireless Gateway Installation
•
Attach Gateway Enclosure
•
The C3IWireless Gateway features three mounting
The C3IWireless Gateway features three mounting
tabs to be used for mounting. Use lag screws or
bolts appropriate to the structure the device is
mounted to. The C3IWireless Gateway should be
mounted close to the electric meter.
•
The device must be mounted with the access holes
facing
DOWN See Picture
The condensation
facing
DOWN. See Picture.
The condensation
drain hole is located on the bottom of enclosure.
•
Screw Terminals are labeled for power, pulse-status
inputs, and relays 1-3.
•
Power-Status LED will stay solid GREEN with
Power Status LED will stay solid GREEN with
occasional flash when the assigned metering
devices are successfully communicating with the
C3IWireless Gateway.
•
If Transparent Technologies Wireless devices are
used, Status LED should be ON for 4 seconds, then
OFF for 2 seconds when all metering inputs are
OFF for 2 seconds when all metering inputs are
valid.
