6
Quick Start Guide
WARNING
SAFETY WARNING INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
•
This equipment to be operated only after reading this Quick-start Guide.
•
Do not use near combustible or explosive material. Fire may occur.
•
Do not expose to water or rain. Electrical shock may occur.
•
Connect only to grounded outlet.
•
Disconnect power for cleaning and servicing.
•
Disconnect power cord before moving.
•
Be careful not to tip the unit when moving, as this may cause injury.
•
Do not operate if cord or plug is damaged. Contact an authorized service
facility for examination and/or repair.
•
Arrange cord away from traffic areas and where it is not a tripping hazard.
Do not cover with rug or carpet.
•
High-intensity ultraviolet light inside. Avoid eye and skin exposure.
First Time Setup
•
Carefully remove OCA unit from packaging. Inspect for damage and make sure that the HEPA filter is
installed correctly.
•
Place the OCA unit in a suitable and effective spot. The Placement Guides on our website can assist you in
finding the right location for your space.
•
Plug OCA unit into appropriate power source (see manual for more information). The power button will
flash white.
•
Press power button. The unit will perform an internal safety/maintenance check. If there are any safety or
maintenance issues, one or more of the HEPA, UVGI or PreFilter indicators will turn red and the housing
light for that area will flash blue. If this occurs, consult the Operations and Maintenance Manual.
Quick Start Guide
