T110 Configuration and Options
5 of 8
Ph# 1-800-663-8806
www.omnexcontrols.com
T110 Transmitter
F 1
F 2
F 3
F 4
F 5
F 6
F 7
F 8
F 10
F 9
Configuration Notes
:
•
A MAXIMUM of 20 buttons can be utilized on the T110 transmitter. Using the above diagram,
function 11 is used by pressing the SHIFT button (GREEN ON button) and button 1, function 12
is SHIFT + button 2 and so on.
•
Define operation and function name for each button. Positions not indicated in the following I/O
table will be left blank and not mapped to an output.
•
Button Blocks are available for unused button pairs if desired (see picture)
•
PLEASE NOTE, R160 receiver has 19 outputs. Any output can also
be used as a digital or proportional input (4-20mA, 0-10 Volt, etc.).
Please specify and inputs and their desired actions in the table on
page 6 or in the Special Requirements section on page 7.
ON/Shift
OFF
10
8
6
4
2
1
3
5
7
9
OFF
STOP
ON/Shift
T110E
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
T110