Copyright © 2015 Omix-Ada
®
, Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
Page 14/30
Section D - Bow and Slider Installation
2. Align rear bow assembly with mounting bolts on rear roll
bar, mark line approximately 2” on fabric, and make cut
to accept mounting tab of rear bow assembly. Repeat for
other side.
1. Unzip rear rollbar cover past curved point and remove
bolt; retain bolt and washer for later use. Location of bolt is
indicated by arrow shown below.
Tools Needed:
5mm, 6mm Allen Keys
13mm Socket Wrench
Marker
Hobby Knife
Carefully read and understand all instructions before proceeding. We recommend two people
for this installation.