Section 2: Quick Start
2.1 Connection of sensors to the Datalog X-PRO
There are more than 60 different sensors that the user can connect to the
Datalog X-PRO.
One device can receive up to three different sensors
communicating with the main unit
through their sensor interfaces.
The sensors selected can be used to measure multiple and different variables
, and be
implemented in
different use cases
.
For more information about the types of sensors offered
with the equipment and their possible applications, refer to
Section 5.1 of the User’s
Manual of the Datalog X-PRO.
NOTE:
A sensor can be installed in any of the three Datalog X-PRO ports, however, once the
installation is complete, it is necessary to relate them to the Monitoring Platform. For
that reason, once the configuration is done, avoid changing any sensor to another port,
as this could cause confusion and erroneous readings on the monitoring platform.
1. Align the marked guide on the sensor cable with the port.
2. Push gently into the connector until it bottoms out.
3. Screw the sensor so that it is fixed.
4. Pull slightly on the sensor and check that the sensor is securely attached to its port.
Figure 2-1 Sensor Connection
8
June
2023
