Omicron CMC 356, Руководство пользователя

Страница: 114 / 142

CMC 356 Reference Manual
114
The OSH256 connects to the EXIF socket of a CMC 356 by means of the
adapter cable VEHK0010 (refer to section 9.6.5, "Adapter Cable for
Scanning Heads" on page 117) or a
CMLIB B (refer to section 9.6.6,
"CMLIB B" on page 118).
For relay testing applications the IFB256 serves to connect to a binary input
of a CMC test set (refer to section 9.6.2 below).
9.6.2 Interface Box IFB256
Typically, the combination of a scanning head OSH256 with an interface box
IFB256 is used for relay testing when binary information (a trigger signal)
originates from a relay's LED. The IFB256 is directly connected to the EXIF
socket of a CMC 356 , which provides the auxiliary DC supply through the
IFB256 to the scanning head. The binary signal is connected to the inputs of
the CMC via banana plug leads.
Figure 9-12:
Interface box
IFB256
Order number: VEHZ1152
To OSH256
To binary input of the CMC 356
To EXIF socket at the rear of the CMC 356