Mounting the fixture in areas away from reach by unauthorized
personnel is always recommended. Before mounting the fixture
make sure that the area you are using can hold a minimum load
of 5x the Fixtures weight. You must always use a secondary
safety attachment, such as a safety cable.
The TitanWash
™
Zoom 5in1 is fully operational in any install position, including:
hanging upside down on a truss or by setting it on a flat level
surface. Always make sure that all fixture are kept at least 0.5m
away from any flammable materials.
For best results this TitanWash
™ Zoom 5in1 requires routine
cleaning and maintenance. Excessive dust, smoke fluid, and
particulate buildup will degrade the performance and will cause the
fixture to overheat. The damage from this is not is not covered in the
manufacture warranty. Always make sure you unplug the fixture
before opening any covers for cleaning. Optical components should
be cleaned carefully and do not use any harmful solvents to avoid
damage. Remember to keep all air vents clean and free from clutter
that will prevents constant air flow.
8. Cleaning & Maintenance
6. DMX Channels 7. Installation
Channel
16 Bit Standard
mode(16CH)
1CH
Dimmer
2CH
Red
3CH
Green
4CH
Blue
5CH
Amber
6CH
UV
7CH
Dimmer 2
8CH
Pan
9CH
Tilt
10CH
Pan Fine
11CH
Tilt Fine
12CH
Pan Tilt Motor Speed
13CH
Focus
14CH
Strobe
15CH
Macro
16CH
Internal colors
17CH
Internal ID Code
