Please Note:
Specifications and improvements in the design of
this unit and this manual are
subject to change without any prior written notice.
Unpacking:
Thank you for purchasing the Titan™ 575W Moving Heads. Every
Titan™ 575W Moving Heads has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the ship-ping carton for damage that may have occurred
during shipping. If the carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all accessories necessary to operate the unit has arrived intact.
PLEASE
recycle the shipping carton when ever possible.
Introduction:
The Titan™ 575W Moving Heads is part of OMEZ’s continuing
pursuit for
creating high quality affordable intelligent fixtures.
This unit can be used as a stand alone, or be controlled via DMX controller.
LCD DISPLAY OPERATIONS
When light on, the display panel will showing DMX512 mode, press UP or DOWN to choose
press
MEUN/ENTER to confirm or into next, all the showing as following items.
1) DMX512 mode
2) DMX address, than press MEUN/ENTER the display shows DMX512 set 001, press UP or
DOWN to choose 002, 003,004, by analogy, press ESC to exit.
3) Conf ig set, press MEUN/ENTER the display shows CHANNEL SET, FAN SET and
TEMPERATURE SET, as CHANNEL SET, there are 3DMX modes to choose, as
STANDARD,EXTENDED and SHORT, press UP or DOWN to choose needed. As STANARD
mode has DMX 13channels, EXTENED mode has DMX 15channels, SHORT mode has DMX
9channels. Press ESC
to exit.
4) Option set, into this state, the display shows Pan invert and Tilt invert, as needed can be
selected.
5) Display set, into this state, the display shows Language set and display invert, as needed
can be selected.
6)Work mode, press MEUN/ENTER the display shows DMX512 MODE, SLAVE
MODE,SOUND MODE, DEMO MODE2 AND DEMO MODE1, press UP or DOWN to
choose, press MEUN/ENTER to confirm., press ECS to exit.