Mounting the fixture in areas away from reach by unauthorized
personnel is always recommended. Before mounting the fixture
make sure that the area you are using can hold a minimum load
of 5x the Fixtures weight. You must always use a secondary
safety attachment, such as a safety cable.
The
TitanPar™
36x3w is fully operational in any install position, including:
hanging upside down on a truss or by setting it on a flat level
surface. Always make sure that all fixture are kept at least 0.5m
away from any flammable materials.
For best results this Ti
tanPar™ 36x3w requires routine cleaning and
maintenance. Excessive dust, smoke fluid, and particulate buildup
will degrade the performance and will cause the fixture to overheat.
The damage from this is not covered in the manufacture warranty.
Always make sure you unplug the fixture before opening any covers
for cleaning. Optical components should be cleaned carefully and do
not use any harmful solvents to avoid damage. Remember to keep
all air vents clean and free from clutter that will prevents constant air
flow.
8. Cleaning & Maintenance
7. Installation
