4 |
P a g e
PART 1: INTRODUCTION
Safety and EMC Considerations
ESD Warning:
Warning:
The following parts of the unit are ESD sensitive:
•
Antenna
•
LCD display
•
Metal connectors for signal and power
•
Metal body of sensor probes
EMC Considerations:
•
Whenever EMC is an issue, always use shielded cables.
•
Never run signal and power wires in the same conduit.
•
Use twisted-pair wires for differential signal connections.
•
Install Ferrite Bead(s) on signal wires close to the instrument if EMC problems
persist.
•
Failure to follow all instructions and warnings may result in injury!
Before You Begin
Inspecting Your Shipment:
Remove the packing slip and verify that you have received everything listed. Inspect
the container and equipment for signs of damage as soon as you receive the shipment.
Note any evidence of rough handling in transit. Immediately report any damage to the
shipping agent. The carrier will not honor damage claims unless all shipping material is
saved for inspection. After examining and removing the contents, save the packing
material and carton in the event reshipment is necessary.
If you need assistance, please contact the Customer Service Department n earest
you.
Manuals / Software:
The latest User Manual as well as free software including iConnect and Omega
Dashboard are available at the website listed on the cover page of this manual.
