6
7
2.
Place the device
over the desired treatment area.
Ensure that the electrodes are in contact with the skin.
3.
Press the power button on the Wireless
host
.
Blue
lights will activate.
4.
Press the remote contol's power
button
.
The light
will be on and the device will be set to Mode 1
by default
. Th
is unit has 6 modes
.
Once
the host
device
is
successfully connected to the remote control
, the Wi-Fi
symbol will display on the remote control screen
.
If the
remote control
is not operated or connected within two
minutes, it will automatically power down.
5.
Treatment will end on its own after 30 minutes
.
Treatment can be stopped anytime
by pressing power
button on the
host or remote control
.
DO NOT attempt to
remove the device from the body during treatment.
6.
Se
t the Mode
. Press the “M” button on remote
control
to
set the mode
or
quickly tap the power button
on
the host
device and then se
t the mode. For safety, whe
n the
mode
is changed
, the intensity will automatically
decrease to t
he
lowest setting.
To
Change the
I
ntensity
:
On the host or
remote device, press t
he “+”
to increase intensity or the
”-”
button
to decrease intensity.
7.
Time setting
.
Press remote's "T" button to set time.
Treatment can be set between 10-60mins in increments of
10 mins
.
Pause Unit:
Press
the
on remote control to
pause
and/or continue the treatment.
7.
To safely power off device during stimulation, you may
long press the power button on the remote control or
press
and hold the power button on the host device for 3
seconds
.
Replace protective film over electrodes to store
.
Note:
1. The
control
unit
is
compatible with all Omega Wireless
Pads.
2.
When
host is used
by itself
the remote control
can be
added
mid-treatment
, and the strength will
reset to the
default
starting value after the remote is connected.
Unit Storage & Maintenance
•
Use a damp cloth with mild soap to gently wipe down
and clean the unit.
Note:
This
unit has
water detection
technology. Do not
expose or
submerge th
is unit
in water or
any
other
liquids.
Water damage to the
device or its components
will void
the
warranty.
• Th
is unit
should be operated, transported and stored
at
temperatures between 50° F and 104° F (10° C and 40°
C), with relative humidity between 30% - 85%. All values
have+/- 10% tolerance.
• Store the device, remote control
,
and
electrodes
in
original packaging
between treatment sessions
.
Содержание TENS
Страница 1: ...Omega Wireless with Remote User Manual...