Omega TCL-3M165E2 Series, Руководство пользователя

Страница: 36 / 60

Operation Series TCL-3M165E2
- 36 -
5.6 Test Task
Here, you can select and manage existing test tasks. You can create new test tasks or tailor
unprotected test tasks to your requirements.
From the parameter field "Test Task" of the main window, you get to the window "Select Test
Task".
Select Test Task:
Information on the selected test task is displayed in the
information box.
All the test tasks of the calibrator are displayed in the
selection list.
From the toolbar, you can accept the selected test
task, or search for test tasks or switch to expert mode
for managing and configuring the test tasks.
Operation is analogous to the section "Select Function" (

§ 5.4.1).
In addition, you can also search for test tasks:

Tap on the icon to search for a test task.

A virtual keyboard with an input line is displayed.

Input the desired search term and confirm your input.

The result of the search is shown in the selection list.
Manage Test Task:
From the "Select Test Task" window, you can use the icon to go to the window "Manage
Test Task".
This window is different from the "Select Test Task"
window only in the other elements in the toolbar.
The information box and selection list are the same.
The test tasks can be sorted, copied, deleted or
configured, or new ones created.
Operation of the window is analogous to the sections
(

§ 5.4.2) and (

§ 5.5.2).
Configure Test Task:
From the "Manage Test Task" window, you can use the icon to go to the window
"Configure Test Task".
Here, you can change the parameters of the selected
test task.

Tap on the parameter field of the desired
parameter.

The window of the parameter is opened. You can
configure the parameter there.