Omega TCL-3M165E2 Series, Руководство пользователя

Страница: 28 / 60

Operation Series TCL-3M165E2
- 28 -
5.1 Main window
The individual icons and the most important ranges of the main window are presented in brief
in the following.
 Calibrator Set Up:
By using the icon, you can reach the "Calibrator Set Up" window. There, you can
change the settings of the calibrator (

p. 41).

Measurement reports:
By using the icon, you can reach the "Select log data" window. There, you can select
saved measurement logs and view them (

p. 45).

Remote Control:
Enables Internet communication.

Test Task:
Using this parameter field, you can reach the "Select Test Task" window. There, you can
select the saved test tasks and create or configure your own test tasks (

p. 36).
 Switching off:
By using the icon, you can switch the calibrator off (

§ 4.4 "Switching on, cool down
and switching off").

Display range:
The reference temperature, the set temperature as well as additional information related
to the selected test task (

p. 47).
 Alarm signal:
You can switch the alarm signal on or off using the icon / .
In the window " Alarm settings" (

p. 40) you can define under what criteria the alarm
signal is to be activated.

Start / Stop slider:
The start / stop slider is used to start or end the testing process.
 Configuration range (

§ 5.2):
You can use the parameter fields of the configuration range to get to the parameter
windows of the calibrator.
By using the icon, you can get to the parameter fields of the other parameters.