Omega OWM75W, Руководство пользователя, Страница: 11 / 17

Operate Washing Machine Operate Washing Machine
P.20 P.21
2.The door lock is unlocked.
3.Close the door when the clothes needs are loaded and repress the
《
Start/Pause
》
button.
Notes:Don’t use the Reload function when the water level over the edge of the inner tub
or the temperature is higher.
- Child Lock
To avoid that the washing procedure cannot operate normally due to the mis operation by
kids during the washing procedure, you can select this function, In this case, the other
buttons except On/Off button can not work, at this state ,the machine power off when press
the key on/off. The machine remembers the program child lock and the program during
powered off when press the key on/off again.
Press Rinse and Pre Wash together 2.5 seconds during the running procedure, the buzzer
will beep ,Start/Pause button as well as the rotary switch are locked. Press the two buttons
for 2.5 seconds together and buzzer will beep to release to locking. But cut off the power
supply , the kid’s protection is also release to locking. The kid’s protection will not be
cancelled after all procedures are completed.
- Bubble Removal Function
Bubble Check Function: Redundant bubbles will occur when there is excessive detergent,
which will affect wash and rinse effects. The procedure will check automatically and one
bubble removal procedure will be added automatically to remove bubbles when excessive
bubbles are checked.
- Rinse&Spin
Separate Rinse&Spin Procedure.
- Drain Only
Separate Drain only Procedure.
- Mix
You can select this procedure wash the tough clothes, that need much more time and
- Sport Wear
You can select this procedure to wash the activewear.
-
Jeans
This program is specially designed for washing jeans.
-
Hand Wash
As for few light dirty clothes, the default temperature of washing is cold.
- My Cycle
Press Spin 3sec. for my cycle to memory the procedure. The default my cycle is cotton.
The main function can be selected as follows:
- Prewash
The Prewash function can get an extra wash before main wash.
- Speed Wash
The function can decrease the washing time.
- Extra Rinse
The laundry will undergo extra rinse once after you select it.
- Reload
This operation can be executed during the washing procedure. When the drum of the
washing machine is still rolling and there is large amount of water with high temperature
in the drum. The state is unsafe and the door cannot be opened forcefully. To press
《
Start/Pause
》
for 3 sec. to reload, and start the clothes adding in the midway function .
Please follow the steps as bellow:
- Delay
Delay function can be set with this button, the delaying time is 0-24 H.
Set the Delay function:
1. Select a programme;
2.Press the Delay button to choose the time;
3.Press Start/Pause to commence the delay operation
.
Cancel the Delay function: Press the Delay button until the display will be 0H.It should be
pressed before starting the program. If the program already started, should press the
On/Off button.
Notes: If there is any break in the power supply while the machine is operating, a special
memory stores the selected programme and when the power is restarted, press the
Start/Pause button the left time is continues
.
1.Wait until the drum stops rotation.
strength. It is used for clothes used daily and made from cotton, such as sheets, pillowcases
bathrobes and underwear.