
24
Operation Instruction
NOTE:
AS/NZS 2007.1: This program is the test cycle. The information for comparability test in accordance with
AS/NZS 2007.1.
Starting a Cycle Wash
1. Draw out the lower and upper basket, load the dishes and push them back. It is commended to load the lower
basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page “Product fiche”. Make sure that the water
supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause button, the dishwasher will start its
cycle.
Changing the Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time otherwise, the detergent may have already
been released and the dishwasher may have already drained the wash water. If this is the case, the dishwasher
needs to be reset and the detergent dispenser must be refilled. To reset the dishwasher, follow the instructions
below:
1. Press the Start/Pause button to pause the washing.
2. Press Program button for more than 3 seconds - the program will cancel.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.
Forget To Add A Dish?
A forgotten dish can be added any time before the detergent dispenser opens. If this is the case, follow the
instructions below:
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button after 10 seconds, the dishwasher will start.
Содержание OSI700
Страница 1: ...Instruction Manual Product Type Model OSI700 ...
Страница 25: ...25 Operation Instruction LOADING THE BASKETS ACCORDING TO AS NZS 2007 1 ...
Страница 26: ...26 Operation Instruction LOADING THE BASKETS ACCORDING TO AS NZS 2007 1 ...
Страница 36: ...1 ...