Omega ORU50XL Скачать руководство пользователя страница 6

 

 

Installation Instructions 

Please ensure that all power is switched off before installing the range hood. Installation must be in 

accordance to the local electrical authority and codes. This range hood must be earthed at all times for the 

operators’ safety. 
The G.P.O. for the range hood should be positioned to enable the user to turn the 

power off, to enable cleaning and any maintenance required. 
Ensure that when installing the range hood, that it is protected from any possible 

damage from tools etc. 
Ducting for this unit must be installed in accordance to the local authority. Ensure that 

the fixings used for this range hood are suitable. 
Check the area where the range hood is to be fitted, to ensure that it is structurally 

sound. 
Before using the appliance, remove the plastic coatings protecting the stainless steel finish. 

Ensure that the wall is structurally sound, and is capable of 

carrying the weight of the range hood. 

It is recommended that the dimension be checked on the range 

hood before installing. 

1. 

The cooker hood should be placed at a distance of 65-

75cm (26-30inch) from the cooking surface for the best 

effect. 

2. 

Drill a hole in the cupboard, 490*265(mm) for model 

ORU50XL. 

3. 

Make sure the distance between the edge of the hole and 

the edge of the cupboard edge is at least 35mm. Take 

down the filter and remove the four screws on the panel. 

4. 

Use random accessory tighten screws fix the hood into 

cabinet. 

5. 

Use 4 screws fix the panel into body and equip the filter. 

6. 

Install one-way valve: put the one-way valve into air outlet, 

Put on the one-way valve with air outlet. 

Operating Instructions 

Note

: Before the unit can be operated, it must be ducted. 

1.  Push ‘Stop’ button, the motor will stop. 
2.  Push the ‘Low’ button, the motor runs at low speed. 
3.  Push the ‘Mid’ button, the motor runs at mid speed.  
4.  Push the ‘High’ button, the motor runs at high speed. 
5.  Push the ‘Light’ button and the two lights will be on.  
6.  Push it again and the light will turn off. 

 

 

Содержание ORU50XL










Отзывы: