Omega ORT61X, Инструкция по эксплуатации

Страница: 6 / 12

6
Installation Instructions
There are two methods to install the cooker hood:
Method one: Mounted on the wall:
1. The cooker hood should be placed at a distance of 65-75cm from the cooking surface for best
effect.
2. To install onto the wall drill 4 holes of Ø8mm on a suitable place according with the centre
distance of hole in the back of the cooker hood.
3. Insert the nut into the holes.
4. Insert the screws into the nuts and tight.
5. Put up the cooker hood onto the fixed screws.
7
Installation Instructions
Method two: built-in the cabinet:
1. Drill 4 holes of 4mm diameter at the bottom of the hanging cupboard
2. Put the one-way valve on the cooker hood, then install the cooker hood on the bottom of the
cupboard, tighten the hood with the M4 screws.
3. Use two 3*12 screws to fix the adjusted board on the bottom of the hood in order to keep out the
gap between hood back and cupboard.
60cm 90cm