Omega ORC64XBA, Инструкция по эксплуатации, Страница: 8 / 11

5
OPERATING INSTRUCTIONS
When the power is connected and switched on you will hear a beep. The display screen will be backlit for 30
seconds and the rangehood will go into standby mode.
SETTING THE TIME (24 hour time)
In standby mode hold down the Timer button (2-3 seconds) until the Hour symbol on the display screen starts to
flash.
Touch the Add/ON or Dec/OFF (-) buttons to adjust the hour. Touch the Timer button once the hours have
been set this will allow you to adjust the minutes by touching the Add/ON or Dec/OFF ( - ) buttons.
ADJUSTING THE MOTOR SPEED
•
Touch the Add/ON button and the motor will run at low speed and the display screen will show .
• Touch the Add/ON button again and the motor will run at medium speed and the display screen will
show .
•
Touch the Add/ON button a third time and the motor will run at high speed and the display screen will
show .
You are able to decrease the motor speed by touching the Dec/OFF button ( - ). Keep touching the Dec/OFF ( - )
button until all the bars disappear and the motor will stop and the rangehood will go into standby mode.
LIGHT
The lights work independently of the other functions. Push the light button and the two lighting lamps will come
on the display screen will also show a light symbol. Push it again and the lamps will turn off.
TIMER
The timer can be used to turn off the rangehood automatically after a period of time (5, 15 and 30 minutes).
Note
: The timer does not affect the lamps.
While the rangehood motor is running in any speed press the Timer button and the display screen will show
, press the Timer button again and the display will show , press the Timer button again and the
display will show . If the Timer button is pressed again the display will go back to show .