Omega OO845XR, Инструкции по использованию, уходу и установке

Страница: 17 / 24

CLEANING AND MAINTENANCE
Never clean the oven with the high- pressure steam cleaning device, as it may
provoke short circuit.
Before cleaning switch the cooker off and let it cool down completely.
Front side of the casing
For cleaning of frontal part of the cooker use the usual cleaning agents and follow
the manufacturer’s instructions.
Never use any aggressive cleaning agents or dish cleaning accessories which might
cause scratches. For the front door glass use soft cloth and liquid cleaners for
cleaning glass surfaces.
Stainless steel front
Clean the surface with mild detergent (soap) and soft sponge which does not scratch.
Never use aggressive cleaners or solvents, otherwise you may damage the surface.
Enamel coated and plastic surfaces
Clean the knobs and handles with soft cloth and liquid cleaners, intended for use of
smooth enamel surfaces.
Oven
The oven may be cleaned in a traditional mode (using oven cleaners and sprays).
Otherwise respect the following cleaning tips:
- Cool the oven completely before cleaning.
- The oven and the accessories must be cleaned after each use, otherwise stains
might get burned in.
- Oven walls, sprayed with oil from roasting, is best cleaned with warm water and
detergent when the oven is still tepid.
- Hard and heavily stained oven should be cleaned with special oven cleaning
agents. Rinse the cleaner thoroughly and remove any detergent remaining before
the next use.
- Never use aggressive cleaners, like polishing agents, dish cleaning accessories,
corrosion inhibitors, or any other devices that might cause scratches.
- Coated, stainless steel or zinc-coated surfaces or aluminum parts must not come
into contact with oven sprays, since they might cause damage or discoloration.
The same goes for thermostat probe (if the cooker is equipped with it) and exposed
heaters on the oven ceiling.
- When purchasing cleaning agents remember the environment, and strictly follow
the manufacturer’s instructions.
IMPORTANT: Before carrying out any maintenance operations on the oven,
set the automatic isolating switch to the off position.
17