Installation
OMG-USB-485-1
Page
2
Installation
Operating System Installation
Choose
Install Software
at the beginning of the CD and select the
Serial I/O
software drivers and install
SeaCOM
.
System Installation
The screen captures below are taken from a Windows 98 installation. Your
particular operating system may differ slightly from what is shown based on your
version of windows.
The
OMG-USB-485-1:
can be connected to any Upstream Type “A” port either
at the PC host or an Upstream Hub. The
OMG-USB-485-1
is hot-pluggable,
meaning there is no need to power down your computer prior to installation. The
OMG-USB-485-1:
requires no user hardware configuration since there are no
jumpers present on the card.
1.
Connect
OMG-USB-485-1
to an Upstream Host or Hub.
This indicates that the system has recognized the new device and will now
proceed to locate a driver.