Omega OMEGASCOPE OS520 Скачать руководство пользователя страница 28

Страница: 28 / 79

2-15

Using the Handheld Infrared Thermometer

•

To set the low alarm value (OS521 through OS524):

Pull the trigger. Then press and hold the

key until

the Low Alarm Display Mode (LAL) appears.

Press the

key to increment the low alarm value. Press

the

key to decrement the low alarm value.

Press the

key to enable the low alarm function. The

icon appears.

If the temperature drops below the low alarm

setpoint, you will hear a beep and the

icon on

the display flashes.

To disable the low alarm, press the

key again, and

the

icon disappears.

If you are not in Low Alarm Display Mode (LAL) when

the low alarm goes off, you must press the

key to

get into the Low Alarm Display Mode. Then press the

key to disable the low alarm.

The low alarm setpoint does not change when the
thermometer is turned off. However, when the
batteries are replaced, it is reset to the default value
of 0°F (1000°F on OS524 only).

NOTE

LAL

Содержание OMEGASCOPE OS520
















































































Результаты поиска

Содержание OMEGASCOPE OS520

Отзывы:

Omega OMEGASCOPE OS520, Руководство пользователя, Страница: 28 / 79

Результаты поиска

Содержание OMEGASCOPE OS520

Отзывы: