Description
OM-CP-RFC1000
Transmission Distance
(to other OM-CP-RFC1000s)
4000’ max. outdoor - line of sight unobstructed
1000’ max. indoors - typical urban environment
Transmission Distance
(to Data Loggers)
2000’ max. outdoor - line of sight unobstructed
500’ max. indoors - typical urban
Maximum Connected
Data Loggers
64
LED Indicators
Red & Green
Frequency
2.405GHz - 2.475GHz
Ingress Protection
IP40
Interface Type
USB (to PC) / Wirelesss (to Data Logger)
Operating Environment
–20°C to +85°C (-4°F to 185°F),
0%RH to 95%RH (non-condensing)
Material
ABS Plastic (body), PVC Plastic (antenna)
Dimensions
Enclosure: 3.8” x 1.6” x 0.8” / Antenna: 7.2”
Approvals
FCC ID:OA3MRF24J40MC, IC#: 7693A-24J40MC
o “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.”
o “To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20
cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance,
operation at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.”
o “This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur
de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.”
o “Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne
d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les
risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de
sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une
communication satisfaisante.”
Содержание OM-CP-RFC1000
Страница 1: ...OM CP RFC1000 Wireless Transciever ...
