Omega OM-70 Series, Руководство пользователя, Страница: 9 / 28

OmegaView Version 1.4x
6
Last Sample Pane
The Last Sample pane shows the value of the last sample taken, for all the active channels. It also shows when the
next sample will be taken.
Ending the Logging Session
There are a number of ways that the logging session can end:
1. When the logger memory becomes full, and data rollover was not selected during logger setup , the logger
will automatically stop logging and enter the idle state.
2. Selecting End Logging from the Logger menu.
3. Logging will stop automatically if the logger detects a low battery condition.
4. If the battery is removed from the logger, logging will stop. No data will be lost.
Once logging has ended, it cannot be resumed without erasing the logged samples stored in the logger memory.
Loading Logger Data
To get the sampled data from your logger, connect the logger to your computer and click the button on the
toolbar. Once the data is transferred from the logger to your PC, the data graph and data listing windows will be
displayed.
The graph display will be blank if there are less than two data points logged. The listing window will be blank if
there are no data points logged (as can happen during delayed logging, or when logging is set to start on button
press).
Automatic Data Retrieval
The Interface Software can be setup to automatically load the data from the logger into the computer as samples
become available. In this mode the
graph and the listing windows will be updated automatically with the new data.
This is how to enable the automatic data retrieval:
•
Make sure that the logging device is connected to your computer .
•
Make sure that the device is logging data . Automatic retrieval is not available when the logger is not logging.