XX-XX
PAGE X-X
MODULE DiAgnOSTiCS
BLADE-AL-SERIES
PAGE 1-1
1
DISCONNECT
BLADE from
remote starter.
2
PRESS AND HOLD
programming button while re-
connecting BLADE to remote
starter.
3
LED will fl ash red. Immediately
RELEASE
programming button.
4
LED will turn solid red for 2
seconds,
RESET COMPLETED
.
Reconnect all connectors and
repeat programming procedure.
FlASHinG BlUe
correctly
programmed
and operational
SoliD ReD
incorrectly
programmed
FlASHinG ReD
incorrectly
programmed
leD oFF
invalid ground
when running
status from r.s.
SoliD ReD
waiting
for more vehicle
information
leD oFF
at rest and
ready for a
r.s. sequence
FlASHinG ReD
incorrectly
programmed
or connected
FlASHinG BlUe
false ground
when running
status from r.s.
SoliD ReD
waiting
for more vehicle
information
SoliD BlUe
THen oFF
correctly
programmed
FlASHinG ReD
missing/wrong
connection or
fi rmware
leD oFF
no activity
or already
programmed
FACTOrY rESET PrOCEDUrE
MODULE DiAgnOSTiCS
DURinG PRoGRAMMinG
DURinG ReMoTe START (R.S.)
WiTH iGniTion oFF
Page 12 of 12
OL-BLADE-AL(DL)-CH6
20100901
INSTALL GUIDE
www.BLADEUpDATE.cOm
Omega Research & Development Inc. © 2010
All in one
Chrysler/DoDge/Jeep
Doc. No.: ##3849##
