
When the wo rking cycle has finished, the buzzer o f the dishwasher will sound for 8 seconds, the n stop. Turn off
the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unlo ading th e di shwasher to avoid ha ndling the dishes and utensil s while they
are still hot and more susceptible to break age. They will also d ry better.
Switch Off the Dishwasher
The program light is on but is not bl inkin g, only in this case the programme has ended.
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 mi nutes
before removing from the appli ance .
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet in side.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
If you open the door
, the machine will pause. The pr ogram light will
stop blinking and the buzzer will mooing every minute unless you close the door . After
you close the door ,the machine will keep on working after 10 seconds.
during a wash cycle
Premise:
A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash wa ter.
If this is the case, the detergent dispenser must be refilled (see the section entitled " Loading the
Detergent " ).
Open the door ,press the Program button
, the mach ine will be in standby state,
then you ca n change the program to the desired cycle setting (see the section entitled " Starting a
wash cycle. . ." ).
mo re than 3 seconds
1
2
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working, you can open the door
completely.
2
3
Open the door a little .
1
4
5
The dishwasher will run after 10 seconds.
Wash th e arms in soapy and warm water and use a soft brush to
clean the jets. R eplace them after rinsing the m th oroughly.
When following this procedure from step1 to step 3, the filter system will be removed;
when following it from Step 3 to Step 1, the filter system will be installed.
It is dangerous to ope n the door when washing, because the hot wate r ma y scald you.
Содержание OFI604A
Страница 1: ...14 place settings OFI604A ...
Страница 27: ......