8
Test the operation of the cooker before leaving
Note: These burners have no aeration adjustment.
Check correct operation of the ignitions system and operation of the regulator and operation of the burners individually and
in combination. Burner flames should be clear blue, with no yellow tipping. If the burners show any abnormality check that
the burners are correctly located. If satisfactory performance cannot be obtained, contact service
1300 739 033.
Important
Before leaving instruct the owner in the use of the cooker it should be expressly noted that we cannot accept any liability for
direct or indirect damage caused by wrong connection or improper installation. When being repaired, the appliance must
always be disconnected from the mains supply; if required, notify our customer service.
Support Legs
The cookers are supplied with four transit supports (one for each corner).
Four support legs are supplied separately and are fitted on location to the four corners of the lower support frame. Each
support leg is pushed over the relevant transit support until flush with the support frame.
Each leg is adjusted by screwing the lower section in or out as required for fitting to a 900mm bench height. For lower
bench tops adjust the height of 180mm the hob is located 10mm above the horizontal combustible surface, ref. AS/NZS
5601.
WARNING:
In order to prevent accidental tipping of the appliance, the stabilising means must be installed
according to these instructions.
If
t
he
le
gs are no
t
used and
the
c
oo
ke
r
i
s
m
ounte
d
on
to
a plinth
,
fi
t
t
ra
n
s
i
t
l
egs
to
all
ow
f
o
r
c
le
arance
.
Once legs a
re
ad
j
us
ted to
a
nomina
l
co
oker
h
e
i
gh
t
o
f
9
10 m
m
,
fit t
he ant
i-
tilt
restraint
bracke
t.