Omega OF694CX, Инструкция по установке и эксплуатации

Страница: 6 / 20

6
The feet are packed inside the oven cavity. Fix by angling the cooker slightly
and screwing into the 4 corners of the base panel. Adjust the cooker to the
appropriate height, then fit the cooker into place. The cooker should be level
and stable when installed, otherwise adjust the height of the appropriate foot.
To stop the cooker from being accidentally toppled over, an anti-tilt bracket must be
fitted.
First take the anti-tilt bracket, screw and plastic plug (as per figure 1). Fix the anti-tilt
bracket to the floor 50mm in from the rear wall and 50mm from the side wall or
cabinet (as per figure 2). Push the appliance into position so that the appropriate
foot slides into the bracket (as per figure 3), fixing it in place so the appliance cannot
tilt away from either wall.
Figure 1
Figure 2
Figure 3