Omega OCC64KZCOM, Инструкция по эксплуатации

Страница: 6 / 12

6
Installation Instructions
Installation of the Hob
The appliance is supplied with an installation kit including adhesive sealing material, fixing brackets and
screws.
•
Cut the aperture dimensions as indicated in the figure. Locate the aperture on the worktop so
that, after the hob is installed, the following requirements are followed.
B (mm) 590 min. A (mm) 50
T (mm) 520 min. C (mm) 50
H (mm) 41-47.5 min. E (mm) 500
C1 (mm) 560 min. F (mm) 10
C2 (mm) 490 G (mm) 20
D (mm) 50 I (mm) 25
J (mm) 5
•
Apply the supplied one-sided self- adhesive sealing tape all the way around the lower edge of
the cooktop. Do not stretch the tape.
•
Screw the 4 worktop mounting brackets on to the side walls of the appliance.
•
Insert the appliance into the aperture.