Omega OCC30TZ, Инструкции по установке, эксплуатации и обслуживанию

Страница: 7 / 12

5
Once cooking has finished, press the cooking zone button for the cooking
zone to be turned off.
Adjust the power setting down to “0” using the decrease button, or by
pressing both the decrease and increase buttons simultaneously.
Turn the whole cooktop off by pressing the ON/OFF control button.
If a cooking zone is hot after the cooking zone has been turned off, the
display will show “H” until the cooking zone cools down.
KEY LOCK:
The key lock is used to disable the control buttons (except the ON/OFF button) to stop accidental changes to
settings.
To lock the appliance, first turn on the power using the ON/OFF control
button, and adjust the cooking zone settings. Press the key lock button.
The timer display will change to “LO”, indicating the key lock is active.
To disable the key lock function, first make sure the cooktop is on. Press
the key lock button for a few seconds and the buttons will become
responsive again.
TIMER FUNCTIONS:
There are two different timer functions. The first is the Minute Minder. This is a timer that can be set up as a
reminder (add extra water, add spices etc) but does not affect the cooking zones in any way. The second is a
cooking zone timer which can be set to turn off a cooking zone after a period of time.
To set up a Minute Minder timer function, first make sure the cooktop has
been turned on (a cooking zone does not need to be active).
Press the timer button and the timer display will flash the current setting.
Adjust the Minute Minder time by pressing the increase & decrease
buttons. The time will be shown on the timer display.
Once the Minute Minder time has been set, it will start to count down (in
minute increments). The timer display will flash for 5 seconds and then will
show the remaining time.
To adjust the time at any point, repeat the steps above. The timer can be
cancelled by reducing the time to “0”, either by pressing the decrease
button, or both the decrease and increase buttons simultaneously.
When the Minute Minder has finished, the buzzer will sound for 30
seconds and the timer display will show “--“.
NOTE: The Minute Minder can be set for a maximum time of 99 minutes.