8
.
For the touch controlled vitroceramic hob, the cable must be H05VV-F
3X2,5 mm² / 60227 IEC 53. You will find the connection diagram shown
on the back of your appliance.
·
During installation, please insure that isolated cables are used. An incorrect
connection might damage your appliance. The guarantee will not cover
such damages.
·
All repairs must be carried out by an authorised service personal or a
qualified electrician.
·
Unplug your appliance before each maintenance. For reconnection, follow
the connection diagrams strictly.
* This appliance mustbe earthed.
* For this connetion a power lead
of wire type H05VV-F should be
used.
2
2
2
