![background image](http://html1.mh-extra.com/html/omega/oc64kb/oc64kb_instruction-manual_3937491008.webp)
8
Operating Instructions
Ceramic Heater
The ceramic heater is controlled by a 6 position knob.
The ceramic heater is operated by turning the control knob to the required setting.
Near each control knob is a symbol which indicates the heater that is controlled by that knob. The on/off
light on the control panel will show if any of the ceramic heaters are in use.
Knob Position
Function
0
Off position
1
Keep warm position
2-3
Heating position at low heat
4-5-6
Cooking, roasting and boiling
position
Residual Heat Indicator
After using the hob there will be heat stored in the vitro-ceramic glass called residual heat. If the residual
heat level is greater than +60°C, the residual heat indicator will be active for the cooking zone which is
above this temperature.
If the power supply to the hob is disconnected while the residual heat indicator is on, the warning light will
flash when the power is reconnected. The display will flash until the residual heat has decreased or until
one of the cooking zones is activated.
Содержание OC64KB
Страница 1: ...Instruction Manual Cooktop OC64KB...
Страница 12: ...1...