Omega OBO888BD, Инструкция по эксплуатации

Страница: 13 / 18

13
Cleaning
WARNING : Switch off the appliance and allow it to cool before cleaning is to be carried out.
General Instructions
• Check whether the cleaning materials are appropriate and recommended by the manufacturer
before use on your appliance.
• Use cream cleaners or liquid cleaners which do not contain particles. Do not use caustic
(corrosive) creams, abrasive cleaning powders, rough wire wool or hard tools as they may
damage the cooker surfaces.
Do not use cleaners that contain particles as they may scratch the glass, enameled and/or
painted parts of your appliance.
• Should any liquids overflow, clean them immediately to avoid parts becoming damaged.
Do not use steam cleaners for cleaning any part of the appliance.
Cleaning the Inside of the Oven
• The insides of enameled ovens are best cleaned while the oven is still warm.
• Wipe the oven with a soft cloth soaked in soapy water after each use. Then, wipe the oven over
again with a wet cloth and dry it.
• You may need to use a liquid cleaning material occasionally to completely clean the oven.
Cleaning the Glass Parts
• Clean the glass parts of your appliance on a regular basis.
• Use a glass cleaner to clean the inside and outside of the glass parts. Then, rinse and dry them
thoroughly with a dry cloth.
Cleaning the Stainless Steel Parts (if available)
• Clean the stainless steel parts of your appliance on a regular basis.
• Wipe the stainless steel parts with a soft cloth soaked in only water. Then, dry them thoroughly
with a dry cloth.
Do not clean the stainless steel parts while they are still hot from cooking.
Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the stainless steel for a
long time.
Cleaning Painted Surfaces (if available)
Spots of tomato, tomato paste, ketchup, lemon, oil derivatives, milk, sugary foods, sugary drinks and coffee
should be cleaned with a cloth dipped in warm water immediately. If these stains are not cleaned and
allowed to dry on the surfaces they are on, they should NOT be rubbed with hard objects (pointed objects,
steel and plastic scouring wires, surface-damaging dish sponge) or cleaning agents containing high levels
of alcohol, stain removers, degreasers, surface abrasive chemicals. Otherwise, corrosion may occur on the
powder painted surfaces, and stains may occur. The manufacturer will not be held responsible for any
damage caused by the use of inappropriate cleaning products or methods.